More Details

 

 

Just how do you really feel when it comes to Hot Water Heater Repair?

Lots of modern houses take advantage of an electric hot water heater for their heating system, because of its convenience as well as convenience of use. However, much like any other electric appliances, issues might occur with its use, all of a sudden. It can be really discouraging to awaken to a cold shower rather than a warm one or having your bath with water that isn't hot adequate or even too warm. Whatever the instance may be, water heater issues can be fairly nerve-racking. Luckily, we have actually made a list of possible options to your hot water heater issues. There are a number of elements that can create many of these issues, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety. Whatever the problem is, getting it repaired must not posture way too much of an issue if you follow these steps:

 

Call An Expert:

If after changing all damaged components and also resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for a professional opinion. The issue with your heating unit could be that the hot and cold taps have been changed or it might be undersized for the quantity of warm water required in your house. Whatever the situation might be, a professional plumber would help resolve the issue.

 

Inspect Your Power Supply:

As fundamental as this may seem, it is very needed. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the concern, merely transform it on and off once again. Replace any type of broken or worn-out fuse. Test the device with power after these modifications to see if it's now working.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to check the temperature level setups on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open the access panel and press the red switch for temperature level reset above the thermostat. This ought to help warm the water. Transform the circuit breaker back on and check if the trouble has actually been dealt with.

 

Examine the Burner in the Water Heater:

If it's not a power problem, after that attempt having a look at your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any of them. If any of them is damaged, change that part and afterwards inspect whether the hot water is back on.

 

Conclusion

Hot water heater problems are not constantly significant. A lot of them result from minor issues like a blown fuse or damaged heating element. Changing the malfunctioning parts need to work. However, if you are still incapable to resolve the problem, give a call to your nearby plumber to come to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate person who reads on Hot Water Heater Repair, I imagined sharing that piece of content was a great idea. Loved our blog posting? Please share it. Let others check it out. Thanks so much for taking the time to read it.

Further Details